Roller Mower Conditioners

If you're in search of high-quality and efficient equipment to elevate your hay and forage operations, you've come to the right place.

Why should I buy ELHO roller mower conditioners?

ELHO Roller Mower Conditioners are designed to deliver exceptional cutting, conditioning, and swath formation performance. Engineered with precision and built to withstand the demanding conditions of New Zealand agriculture, our roller mower conditioners ensure reliable and efficient operation.

Roller Mower Conditioners

NM 3200 F R

A front roller mower conditioner with suspension that produces clean forage!

The ELHO NM 3200 F R (front roller) features the Pendulum Center System (PCS), which enables the mower conditioner to move backwards, swing and rotate. If the cutting unit hits an obstacle, the suspension reduces the force of the impact by 50 percent.

The NM 3200 F R closely follows the field surface thanks to PCS and HydroBalance suspension. This light and precise mower conditioner produces exceptionally clean forage. The NM 3200 F R is a good combination with side mounted mower conditioners and especially a butterfly combination.

 

 


  • Side lights kit
  • Hydraulic kit for sideguards
  • Flat knife kit L+R (3,2/3,3 m)
  • HydroBalance top link (Cat 2/3)
  • Front bar

ELHO NM 3200 F:

  • PCS suspends the mower conditioner from the centre of the upper frame above and in front of the conditioner
  • HydroBalance enables the mower conditioner to follow closely the field surface
  • PCS reduces the force of impacts by up to 50 percent
  • Can also be operated in reverse on tractors with a reverse-drive system

Tractor power requirment, min/max, kW* 60-90
Minimum recommended tractor weight, kg* 5000
Working width, m 3,2
Number of discs 8
Adjustable skid shoes x
Round forged steel finger x
Rotor width, mm 2500
Rotor speed, RPM 920
Swath width, m 1,2-1,8
HydroBalance suspension x
HydroActive releasev x
Transport width, m 3
Weight, kg 1100
PTO speed, 1000 RPM x
PTO speed, 750 RPM 0
Hydraulic coupling, single action 1
Hydraulic pressure, min/max bar 140-210
PTO connection 1 3/8"-Z6 x
3 point linkage Cat.2/3

 

*) The tractor weight and power is determined based on the conditions 
X = Standard O = Option - = Not available





NM 3200 P R

Tried-and-tested solutions and unsurpassed ease of use!

The ELHO NM 3200 P R (pulled roller) mower conditioner has adjustable auxiliary skid shoes and can be raised high on the headland. The end-cushioned boom cylinder is attached to the centre of the cutting unit.

The standard HydroBalance suspension lightens the cutter bar so that it does not scrape along the ground or cause unnecessary friction. Hydraulic adjustable cutting height is available as an option, allowing the cutting height to be adjusted even while driving.

The bevel gear on the NM 3200 P R model can be turned by the operator. In this way, the mower conditioner can also be used on a tractor with just a 540 rpm PTO instead of a 1000 rpm PTO.


  • Tyres 380/55-17
  • Tyre weights
  • Hydraulic kit for sideguards
  • Flat knife kit L+R (3,2/3,3 m)

ELHO Arrow 3200 PR: 

  • N Cutting unit can be lifted high on headlands to prevent swath disturbance
  • Wide load-bearing tyres (300 mm)
  • End cushioning of the boom cylinder
  • Adjustable auxiliary skid shoes
  • Scattering function
  • Easy to connect and service

Tractor power requirment, min/max, kW* 60-90
Working width, m 3,2
Number of discs 8
Adjustable skid shoes x
Polyurethan roller x
Rotor width, mm 2500
Rotor speed, RPM 1000
Swath width, m 1,3-2,5
Spreading x
HydroBalance suspension x
Transport width, m 3,1
Tyre size 300/80-15,3
Optional tyre sizev 380/55-17
Weight, kg 1970
PTO speed, 1000 RPM x
PTO speed, 750 RPM 0
Hydraulic coupling, single action 1+1
Hydraulic coupling, double action 1
Hydraulic pressure, min/max bar 160-210
PTO connection 1 3/8"-Z6 x
3 point linkage Cat.2

 

*) The tractor weight and power is determined based on the conditions
**) front mower not included
***) front mower Included
X = Standard O = Option - = Not available





NM 2400 VC R

Impressive flow with high driving speeds, also with smaller tractors

ELHO 2400 VC R (vertical centre roller) mower conditioners are known for their impressive flow, high driving speeds and clean forage. The adjustable skid shoes and HydroBalance suspension enable the cutter bar to follow the field surface precisely without hitting the ground. The conditioning rollers are gentle on forage crops, minimising crop losses also when cutting sensitive plants. Vertical centre roller mower conditioners are ideal for use also with smaller tractors on the farm. For example, the NM 2400 VC R can be used with a 75-horsepower tractor weighing 3500 kilos.

Vertical centre roller mower conditioners enable forage to be harvested with precision. For example, when working with butterfly units, unmown areas can be left between the mower conditioner and the front machine when making sharp turns. Using a combination of a front mounted mower conditioner and a side mounted mower conditioner, it is possible to turn as sharply as possible without leaving any unmown areas. 


  • Primary shaft with friction clutch
  • Front bar
  • Flat knife kit L+R (2,4 m)

ELHO Roller roller mower conditioners:  

  • Easy to use
  • Own lift cylinder enables fast turns on the headland
  • HydroBalance suspension
  • Cutting unit suspended from the centre
  • Centre of gravity over the tractor’s centreline in transport mode

Tractor power requirment, min/max, kW* 50-80
Working width, m 2,4
Number of discs 6
Adjustable skid shoes x
Polyurethan roller x
Rotor width, mm 1750
Rotor speed, RPM 920
Swath width, m 0,6-1,4
HydroBalance suspension x
Mechanical release, automatic return x
Transport width, m 2,5
Height in transport mode, m 2,75
Weight, kg 1050
PTO speed, 1000 RPM 0
PTO speed, 750 RPM x
Hydraulic coupling, double action 1
Hydraulic pressure, min/max bar 120-210
PTO connection 1 3/8"-Z6 x
3 point linkage Cat.2

 

*) The tractor weight and power is determined based on the conditions
**) front mower not included
***) front mower Included
X = Standard O = Option - = Not available





NM 2800 VC R

Roller mower conditioner for leafy forage!

The ELHO NM 2800 VC R (vertical centre roller) mower conditioner comes with all the key features built in. The cutting unit is suspended from the centre, allowing it to follow the surface lightly, and the extremely reliable cutter bar cuts cleanly.

In transport mode, the cutting unit rotates 120 degrees, keeping the centre of gravity over the tractor’s centreline. This makes it stable to transport even with smaller tractors.

The NM 2800 VC R is a high-quality and fast roller mower conditioner!

 


  • Factory-fitted 540 rpm bevel gear
  • Primary shaft with friction clutch
  • Front bar
  • Flat knife kit L+R (2,8 m)

ELHO Roller roller mower conditioners:  

  • Roller is gentle on leafy forage
  • Easy to use
  • Own lift cylinder enables fast turns on the headland
  • HydroBalance suspension

Tractor power requirment, min/max, kW* 60-90
Working width, m 2,8
Number of discs 7
Adjustable skid shoes x
Polyurethan roller x
Rotor width, mm 2150
Rotor speed, RPM 920
Swath width, m 0,9-1,8
HydroBalance suspension x
Mechanical release, automatic return x
Transport width, m 2,5
Height in transport mode, m 3,1
Weight, kg 1150
PTO speed, 1000 RPM x
PTO speed, 5400 RPM 0
Hydraulic coupling, double action 1
Hydraulic pressure, min/max bar 120-210
PTO connection 1 3/8"-Z6 x
3 point linkage Cat.2

 

*) The tractor weight and power is determined based on the conditions
X = Standard O = Option - = Not available





NM 9000 R

A butterfly roller mower conditioner that does not require a large tractor!

The ELHO NM 9000 R (roller) is the ideal mower conditioner for contractors and large farms. This powerful machine offers optimal weight distribution, excellent usability, HydroBalance suspension and HydroActive impact protection.

The adjustable rollers make it possible to precisely adjust the conditioner to suit the particular plant and climate conditions. The NM 9000 R is especially suitable for cutting leafy forage. In transport mode, the centre of gravity is over the tractor’s centreline, so even a smaller tractor remains stable.

 


  • Hydraulic kit for sideguards
  • Mountain driving kit
  • Front bar
  • Flat knife kit L+R (9 m)
  • HydroBalance suspension with electronic control

ELHO NM 9000 Delta:

  • Low weight and even weight distribution
  • Low power requirement compared to width, high capacity
  • HydroBalance suspension and HydroActive impact protection
  • Quick transfer between transport mode and work position
  • Spring-loaded and adjustable rollers ensure gentle conditioning

Tractor power requirment, min/max, kW* 140-180
Minimum recommended front mower, m 3,2
Working width, m 9
Number of discs 16
Adjustable skid shoes x
Polyurethan roller x
Rotor width, mm 2x2500
Rotor speed, RPM 920
Swath width, m 2x1,3-2,1 **)
HydroBalance suspension x
HydroActive release x
Transport width, m 3
Height in transport mode, m 3,7
Weight, kg 2750
PTO speed, 1000 RPM x
Hydraulic coupling, single action 2
Hydraulic pressure, min/max bar 140-210
PTO connection 1 3/8"-Z6 x
3 point linkage Cat.2/3

 

*) The tractor weight and power is determined based on the conditions
**) front mower not included
X = Standard O = Option - = Not available


NM 3200 F R




NM 3200 VC R

A vertical centre roller mower conditioner with impressive features!

The versatile ELHO NM 3200 VC R vertical centre roller mower conditioner meets a wide range of needs. The adjustable polyurethane rollers ensure gentle conditioning of the crops.

HydroBalance suspension is standard on the large NM 3200 VC R features. In transport mode, the cutting unit is vertical.

The NM 3200 VC R is a high-quality and efficient mower conditioner!


  • Front bar
  • Flat knife kit L+R (3,2/3,3 m)

ELHO Roller roller mower conditioners:  

  • Efficient mowing even with medium-size tractors
  • Own lift cylinder enables fast turns on the headland
  • HydroBalance suspension and HydroActive hydraulic release
  • Spring-loaded and adjustable rollers ensure gentle conditioning

Tractor power requirment, min/max, kW* 80-110
Minimum recommended front mower, m 5000
Working width, m 3,2
Number of discs 8
Adjustable skid shoes x
Polyurethan roller x
Rotor width, mm 2500
Rotor speed, RPM 920
Swath width, m 1,3-2,1
HydroBalance suspension x
Mechanical release, automatic return x
Transport width, m 2,5
Height in transport mode, m 3,7
Weight, kg 1250
PTO speed, 1000 RPM x
Hydraulic coupling, double action 1
Hydraulic pressure, min/max bar 160-210
PTO connection 1 3/8"-Z6 x
3 point linkage Cat.2/3

 

*) The tractor weight and power is determined based on the conditions
**) front mower not included
X = Standard O = Option - = Not available





Innovative Features and Advanced Technology

With innovative features and advanced technology, ELHO roller mower conditioners provide precise cutting and optimal conditioning of your crops. The rollers gently crush the stems, promoting faster drying and superior forage quality. You can trust ELHO to help you achieve optimal results and maximise your productivity.

Durability

Durability is a key focus in the design of our roller mower conditioners. Constructed with high-quality materials and robust components, ELHO machines are built to withstand the rigors of daily use in the field. Invest in an ELHO roller mower conditioner, and you'll have a reliable partner for many harvest seasons to come.

We are here to help!

Our dedicated team is here to assist you in finding the right roller mower conditioner for your specific needs. We understand the unique challenges faced by farmers in NZ, and we're committed to helping you make an informed decision. Whether you have questions about features, compatibility, or operation, we're here to provide the guidance you need.

Invest in an ELHO roller mower conditioner and experience the quality, performance, and reliability that has made us a trusted brand in the agricultural industry.

Get in contact Today!